SP Performance Peak Series Slotted 8-Lug Rotors with Silver Zinc Plating; Front Pair (09-18 RAM 2500)Find parts that fit my vehicle

Lol to the ppl thinking they Stay black

The coating is an anti rust coating the coating is meant to come off where the pads contact leaving the coating to prevent rust. If you think the rotors are black metal then you need to do your research. I worked with sp performance and there brakes are awesome quality they are g3000 iron same as brembo and top brake manufacturers and they offer diff coatings and slot and drilled patterns. Plus the rotors are not garbage from China they are manufactured in north America. Also if the coating melted and burned off then you clearly did not break them in an heat cycle them properly.

sloppy coating does not look like picture and clogged up all of the slots

I spent $1000 for good brakes on my truck. These looked very good to me in the picture. I assumed the black coating was something fancy. The coating is actually just PAINT. once installed and test drove. I realized that the slots are completely clogged with melted paint. i appreciate the paint on the hub of the rotor to prevent rust. But painting the pad face has completely clogged my rotor slots to the point that i need to remove them and use brake cleaner to clean the slots. VERY UNHAPPY. this was not described in the description. not instructions said that I should remove the black coating before installation. overall the rotors look nice and think. but this coating is causing me to do 2 brake jobs now. I recommend buying a NON coated rotor and painting to your liking. it will save you a lot of HASSLE.

Rear Rotors F250

These are direct fit replacements with slots machined into the faces of the rotors for dust/heat dispersal.