Installation Time
(approx) 2 Hours
Difficulty Level:
Simple installation for anyone.
Guaranteed 12/24 Delivery Still Available see item page for details! available on most items - Details
$879.76 pair
Saved - View your saved items
We're sorry. We couldn't save this product at this time.
or use
Features, Description, Q&A, Specs & Installation
Direct Swap. For use with suspensions that have been raised 2.5 to 7 inches, these Fabtech Radius Arms directly swap out the factory arms. The arms have an additional 1 degree of caster built into them, giving them a total of 2 degrees more caster than standard when combined with the simple alignment cams. With these, the drivability with bigger tires is greatly improved.
DOM Tubed. Manufactured with 1.75-inch OD x.120-inch wall DOM tubing is used to make the upper and lower tubes of the arms, which are completely welded shut to ward off corrosion. In addition to this, a dimple die side plate that runs the gap between the tubes stiffens the arm and adds rigidity for strength with no weight gain. With a 13.50-inch tire on a 5-Inch backspace wheel, the Fabtech Radius Arms are offset and positioned inboard compared to the factory arms to enable a complete steering lock.
Better Coating. Lastly, the open design of the Fabtech Radius Arms allows Powder coat to cover the whole arm. Compared to boxed arms that are needle welded and have holes that enable moisture to seep inside and cause rust, this design has better coating coverage.
Installation. Putting these Radius Arms on your ride is easy and requires no drilling.
Warranty. There is a limited lifetime warranty on this product.
Application. These Fabtech Radius Arms for 2.50 to 7-Inch Lift work for all 2014-2024 Dodge 4WD RAM 2500s.
Fitment:
Fabtech FTS23232
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Installation Info
Installation Time
(approx) 2 Hours
Difficulty Level:
Simple installation for anyone.
What's in the Box