Banks Power Boost Tube Upgrade Kit; Natural; Cold Side Only (10-12 6.7L RAM 2500)Find parts that fit my vehicle

Increase flow area up to 37% over the stock boost tubes with Banks' huge 3-1/2" boost tubes. Stock Ram tubes are plastic. Banks boost tubes are 3-1/2" constant diameter mandrel bent Aluminized Steel with larger radius bends. More air allows for more fuel which means more horsepower.

50 State Compliant
CARB E.O. D-161-122
Fitment Note
This kit is designed to work with the stock elbow or new Banks Monster-Ram (3.5" or 4") and the stock intercooler (or aftermarket intercooler with stock inlet and outlet size and location).

Key Features
Increase flow area up to 37% over the stock boost tubes with Banks' huge 3-1/2" boost tubes.
Stock Ram tubes are plastic.
Banks boost tubes are 3-1/2" constant diameter mandrel bent Aluminized Steel with larger radius bends.
More air allows for more fuel which means more horsepower.
Huge increase in size and flow over stock (3.5" vs 3.0")
Greater cooling capacity
Lower EGTs
Mandrel-bent aluminized steel construction
Constant diameter tubing for the best flow
Perfect fit and finish
4- and 5-ply heavy-duty silicone couplers
Spring-loaded constant tension clamps
Combine with Banks 3.5" or 4" Monster Ram for maximum power
Works with stock intercooler or aftermarket intercooler with stock inlet and outlet size and location
Specifications
Are you running the new bad-ass Banks Monster-Ram for the 6.7L Cummins? Banks boost tubes are larger than the factory pipe and designed to work with the stock elbow or new Banks Monster-Ram (3.5" or 4") which will improve airflow, and allow the turbocharger to spool up faster.

Banks cold side tubes have 37% greater flow area than stock tubes. Produced from high-quality aluminized steel, the tubes are mandrel bent and constant diameter. This allows for quicker turbo spool. Better flowing intercooler tubes improve retention of boost pressure (increases density) between turbo, intercooler, and intake resulting in maximum horsepower. Our red powder-coat or natural finish stops before the end of the tubes for better grip ensuring our 4- and 5-ply heavy-duty high-temperature silicone couplers hold tight under high-boost conditions. Spring-loaded constant tension clamps maintain a stronger grip to prevent leaks or blown boots.

This kit is designed to work with the stock elbow or new Banks Monster-Ram (3.5" or 4") and the stock intercooler (or aftermarket intercooler with stock inlet and outlet size and location).

Fitment:

• 2010 Dodge Ram 2500
• 2011 Dodge Ram 2500
• 2012 Dodge Ram 2500

Details

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov