IHC Suspension Lowering Kit with Weld-On C-Notch; 5-Inch Front / 7-Inch Rear (07-16 Sierra 1500 Regular Cab w/ Stock Cast Steel Control Arms)Find parts that fit my vehicle

IHC Suspension is excited to announce our best-selling 2007-2016 GM 1500 Single cabs 5/7 lowering kit with weld on C-notch. IHC Suspension coming from the service/installation side understood the challenges that other kits were not solving.

Our key features that differentiate us from the competition and save you money:

Kill 2 birds with 1 stone. Not only are you lowering the truck but also replacing your 10+-year-old ball joints and bushing with IHC control arms.
IHC’s control arm aligns to factory specs.
Standard upper control arms for camber correction. (No additional parts needed like camber/caster bushings or offset ball joints to align)
IHC’s flip kit has the correct pinion angle built in so no need to use pinion shims.
Weld on C-notch!
MADE IN THE USA!
Manufactured in TEXAS!
Lifetime warranty on all metal parts!


IHC Suspension’s 2007-2016 GM 1500 Single cabs 5/7 lowering kit consists of upper and lower control arms. You achieve the drop with the lower control arm and the upper control arm is for alignment correction. Spacers are included to adjust front control arms from 5” to 4” without purchasing any more parts. Shorter sway bar links are included for better sway bar angle. The rear consists of a flip kit with the correct pinion angle built-in, so NO pinion shims are needed. Nitrogen drop shocks and 2” lowering shackles (need to be set on 2nd hole) are included. C-notch is required. IHC’s weld on under bed C-notch included.

Fitment:

• 2007 GMC Sierra 1500
• 2008 GMC Sierra 1500
• 2009 GMC Sierra 1500
• 2010 GMC Sierra 1500
• 2011 GMC Sierra 1500
• 2012 GMC Sierra 1500
• 2013 GMC Sierra 1500
• 2014 GMC Sierra 1500
• 2015 GMC Sierra 1500
• 2016 GMC Sierra 1500

Details

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov