FST Performance TurboFyner Diesel Fuel Filter/Heater/Water Separator System (Universal; Some Adaptation May Be Required)

The system that started it all (Ramco Performance); The RPM900 is a compact, high flow / low restriction / water separating fuel refining system that filters down to 3 microns and heats fuel while driving.

Overall Compact Size: 10.5” tall x 3.5” wide x 3.5” deep
Weighs: 64 oz
Base: 6061-T6 billet aluminum base/manifold. Not a casting. Anodized Red. Mounting holes: 3/8" - 2 inches center to center.
Flow: 200 gallons per hour
Filtering: 3 Micron FloMax™ media (petroleum or bio-diesel / vegetable oil)
Filter media surface: 427 sq in!! FloMax™ enhanced water-stripping cellulose.
Water Separation: Fuel “crashes & swirls” through base, separating fuel from water. Water settles down in base, fuel goes up through filter.
Burst: 250 psi
Ports: ½” NPT fuel IN & OUT ports and 3/8” NPT fluid ‘heat’ ports / Water drain port.
Heats Fuel: 3/8” Heater ports = Use engine coolant fluid for heat source for fuel heating while engine is running feature. Stops fuel "gelling" while operating. A must with veggie/bio fuel.
(Base) Manufactured from solid 6061-T6 billet aluminum / no castings.
Replacement FloMax™ spin-on type filter: (# RF900D) for ease of changing. Nothing to service or clean out, eliminating the chance for fuel system contamination. A leader in bio-diesel.

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov