FREE 1 to 3-Day Delivery on Orders $119+ Details
How to Install Amp Research BedStep on your Ram
Shop Parts in this Guide
Spacer may be required on 2011-up model trucks
33 ft-lbs / 44 Nm
Remove Bracket
Driver Side bumper mount (do not reuse bolts)
Hex Bolts: 41 ft-lbs / 55 Nm (use new supplied bolts)
6 ft-lbs / 8 Nm
OPERATION
The AMP Research BedStep® is foot operated and deploys and retracts with a nudge of your foot.
To deploy, press down using your left foot, on the forward outside corner of the step pad.
To retract, gently kick the underside of the step pad.
Max Load Capacity: 300lbs.
Always use appropriate hand holds when stepping up to or down from your truck’s cargo bed.
MAINTENANCE TIPS
The step pad surface and linkage arms can be washed with mild soap and water using a soft brush or sponge to dislodge any mud, dirt or accumulated road grime. Rinse with fresh water.
To prevent slipping, avoid applying waxes, lubricants or protectants like Armor All® to the step surface.
ATTENTION!
BEDSTEP SHOULD ALWAYS BE STOWED IN THE RETRACTED POSITION WHEN DRIVING.
Best Sellers
-
J&L 3.0 Oil Separator; Black Anodized; Passenger Side (11-25 2.7L/3.5L EcoBoost, 5.0L F-150)
(500+)
$152.10 $169.00
