Guaranteed 12/24 Delivery Still Available see item page for details! available on most items - Details
$3,229.05
Saved - View your saved items
We're sorry. We couldn't save this product at this time.
or use
Add Local Installation
Description, Q&A
Brand | BajaKits |
Control Arms Placement | Front Lower and Upper |
Description. 12.5" of wheel travel; 2.5" wider per side; 0-4" of lift adjustable for the low Prerunner look and more stable handling - Shocks Sold Separately
Billet Shock Plate is ONLY included with the Purchase of the Custom King 2.5 Coilovers
Stamped Steel, Aluminum, and Forged Steel Control ArmsFor the 2014-2016 Chevy Silverado and GMC Sierra 1500 trucks, GM offered three different upper control arms: stamped steel, aluminum, and forged steel. Additionally, in 2014-2016 GM truck had two different knuckles—aluminum and steel—each with different ball joint hole sizes.
Stamped steel and aluminum arms have a larger ball joint that fit the same knuckle. Steel knuckles with forged steel control arms had smaller ball joint holes that match the cast steel arms only. This is the same setup found on 2007-2014 models. Forged steel and forged aluminum arms have retention clips on the ball joint so if the ball joint cup becomes distorted, it does not fail.
New Stamped Steel Arm Design
The NEW stamped steel arms have a ball joint that is sandwiched between the upper and lower pieces of the arm with a relatively small surface area for ball joint retention with no supporting clips. If these cups distort, the ball joint fails and falls out.
GM 1500 trucks built after April 1, 2016 are stamped steel arms mated to smaller steel knuckles with the larger of the two ball joints. Basically, they are using the larger ball joint from the aluminum arm and putting it in a stamped arm and mating it to a smaller steel knuckle.
Fitment:
BajaKits C12P14 STL
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov