RubberShox DuraTPE Series Front-Rear Coil Spring Buffer Cushion; Red (Universal; Some Adaptation May Be Required)Find parts that fit my vehicle

Universal rubber suspension bump stop

Took less than an hour to install. I hauled my truck camper no staging in the rear thanks to these bump stopper. For the price we'll worth the money. Will recommend

Perfect while they lasted

Fit and finish was great easily installed in less than 30 minutes. Took the truck out on an easy ride and felt the difference. Loaded the sxs onto the trailer went out and felt very well going down the highway. Started to notice a different feel on the way home, hopped out and noticed one of the bump stop extensions was missing. Must have came unglued and fell off. Will not be purchased again feel like having to glue multiple pieces together is kinda cheesy will be searching for a replacement

Bump stops

Bump stops are an amazing product If you tow anything heavy. They help distribute the weight so the truck doesn’t sag. Also, you’re not stressing your suspension as much as you would without the bump stops. Very easy installation, remove factory and plop in the new ones in the same spot

Buffercushion

Measure your coil springs at the widest spot with a download able template. Blue to a piece of card board. "Note book front or back cover works great." After finding your largest gap, select the correct buffer from the chart on the gauge. When buffer gets delivered. It takes about 30 to 40 minutes per side to install. Remember which part of the coil spring you measured. "HINT, USE EITHER A PAINT MARKET OR SHARPE TO MAKE MARKS ON THE WIDEST PART YOU MEASURED. THERE WILL NOT BE ANY GUEST WORK." To be safe I am putting down an afternoon install. It is between 2 and 3 wrenches. It does help, with these buffers It does smooth the bumps out some.

Front/Rear Coil Spring Buffer

This product is awesome. You notice a huge difference between these and the stock ones.