Roush Cold Air Intake (11-14 6.2L F-150 Raptor)Find parts that fit my vehicle

Large Indraft Intake for Amplified Power. Helping your 2011-2014 Raptor with a 6.2L engine leap more fiercely into action, the Roush Performance Cold Air Intake blasts sufficient cold air into the combustion chamber to result in power gains of +8 to +10 horsepower and torque with no other mods. It’s also a great way to set up your F-150’s engine for further turbocharging, or to compliment a high flowing cat-back exhaust system. Stable and durable, it’ll keep enhancing your truck’s power and performance for years.

No Engine Tuning Needed. The Roush Cold Air Intake is designed and engineered in such a way that it doesn’t require an aftermarket tune in order to work. The OEM tune that comes already installed on your F-150’s ECU is fully adequate to the operation of this component.

Wire Reinforced Washable Filter. The Roush Performance Cold Air Intake bears an air filter that is designed to work over the long haul. Made from red fabric with further robustness built in thanks to a double layer of wire mesh, this filter is capable of handling very large air volumes. It is made from high quality materials that enable periodic washing, drying, and reuse rather than replacement when it gets dirty.

Durable Construction, Attractive Finish. The Roush Performance Cold Air Intake is built entirely within the confines of the USA, making it a fully USA-made component. The materials used are injected molded plastics, chosen for their durability, stability, and general toughness. The intake is made to permit strong, unrestricted flow of air into the engine. The air box is made to thoroughly exclude engine heat from the filter air and is decorated with the Roush logo in molded relief lettering.

MAF Housing Fits OE MAF. The MAF housing of the Roush Performance Cold Air Intake is manufactured so that it can accept the 85mm stock MAF. This eliminates the need to flash your Raptor’s engine with an aftermarket tune.

Drop-In, Bolt-On Fitment. Installation of the Roush Cold Air Intake doesn’t require any kind of drilling, cutting, or other modifications to either the part or your truck. It bolts on directly to the OE attachments, and is supplied with all the instructions and hardware you’ll need to accomplish this.

3 Month Anti-Defect Warranty. The Roush Cold Air Intake is supplied with a 90-day limited manufacturer's warranty.

50-State Legal with CARB EO. The Roush Cold Air Intake is made so that when installed on the correct model years of Raptor with a 6.2L engine, it is 50 state street-legal and can be driven in the state of California. The CARB EO Number issued to this component is #D-418-30. Provided that the CARB certification sticker is visible after installation, this component will pass inspection in all states and areas governed by CARB emissions regulations.

Application. This Roush Performance Cold Air Intake is specifically designed to fit the 2011-2014 SVT Raptors equipped with the 6.2L V8 engine. No computer retuning required for operation.

Shop All Truck Parts And Accessories

Shop All Cold Air Intakes For Trucks

Fitment:

• 2011 Ford F-150
• 2012 Ford F-150
• 2013 Ford F-150
• 2014 Ford F-150

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov