Ridetech TQ Series Coil-Over Kit (99-06 2WD Silverado 1500)Find parts that fit my vehicle

Just what I needed! 2015 silverado

I purchased a set of theese new never installed from a buddy and dident get the chance due to a collision with a KAREN! Her fault but truck was totaled, i installed on my truck and it's the best $200 I ever spent on spindles, long story short I sold the truck and had major RAGRETS! now I back in a 2014 and lowering this one, way better in an LTZ than LT love my a/c seats!

Dropped!

Installed this myself through a long weekend in my garage. Kit was packaged well and shipped in quality packaging. Instructions were detailed and clear with torque specs clearly stated. The rear took me longer than the front but I also installed the sway bar. The install went smoothly with a few exceptions listed here. The right rear lower shock bolt and nut were too long. I had to cut both to fit with the U bolts. The rear shocks need to be mounted body down to clear the shock mount. Kinda works out anyway so the shock adjuster knobs are up high and easy to reach. The front upper shock mount plates were installed first, then the coilovers assembly was installed. Much easier to tighten the bolts this way. The instructions show to install assembled but the bolts are a pain to get at. The sway bar instructions say to drill the frame on both sides but only the passenger side needs drilled. The drivers side lined right up with the factory hole. I only needed to cut off the rear spring shackle bolt near the fuel tank as I had the exhaust already removed from the truck. This bolt is tough to cut. Figure on a few Sawzall blades here. Truck rides smooth and firm. No squeaks, or noises of any sort.

SO many parts! But wow, impressive...

I wanted a great suspension on my 22 F150 Single cab short bed. Went with Ridetech. Just finished up the install over the weekend, took a couple days, alone on the driveway situation. First thing I noticed, wow, incredible packaging and organization. Much appreciated. Very little room for improvement. Install went pretty well, very straightforward. Maybe some outdated info but nothing major. Great info, torque specs laid out well, super happy with the whole thing. Had ONE minor issue with a rear ubolt touching the bottom shock mount bolt, had to use a spare from my bin for now, contacting Ridetech for a solid fix. I'm slightly concerned about clearance between the aluminum shock tube and the steel bracket on the frame side/axle side of the rear shocks. pretty close, I may grind off a bit but not sure if it's needed, (Ridetech phone call will confirm). This could definitely be done in a full day on a driveway with the right tools and experience, took me longer alone and with little helpers taking my attention away lol... All in all, my little race truck just got a LOT cooler thanks to Ridetech... Also worth noting the ridiculous customer service of both Ridetech AND AmericanTrucks. I won't go anywhere else for anything they sell. Super impressive!