How to Install Putco Stainless Steel Boss Tailgate Guard - Direct Replacement on your Silverado

PLEASE READ ALL INSTRUCTIONS BEFORE BEGINNING INSTALLATION AND BE SURE TO CHECK TO SEE THAT ALL PARTS AND HARDWARE ARE INCLUDED.

Step 1: Open your tailgate and place tailgate protector on the tailgate to check for proper fit, if the protector does not seem to fit properly, call Putco for assistance.

Step 2: Press firmly on the tailgate protector so that it properly seats on the tailgate and using a drill (corded or cordless) and a Phillip’s screw bit fasten the tailgate protector to the tailgate with the self-tapping screws provided.

HINT: Start with one outside mounting hole, then go to the other outside mounting hole and work your way inward.

Step 3: Remove the protective covering from the surface of your tailgate protector.

Note: PUTCO recommends applying a high quality automotive wax to maintain the original appearance on your new tailgate protector.