K&N Series 57 FIPK Cold Air Intake (11-12 6.2L F-150, Excluding Raptor)Find parts that fit my vehicle

More Power. There's nothing wrong with more power and with a pickup truck more power is almost always a good thing. That's why so many truck owners like the K&N Series 57 FIPK cold air intake models. They offer excellent performance boosts by removing the restrictive paper filter and replacing it with a much more capable cotton filter that lets air flow freely and produces greater power levels. The kit creates huge levels of power and can help boost your truck's total power output by as much as 27.18 HP. That's a huge improvement for such a minor enhancement and it's enough added power for you to feel the difference as well.

No Tune Up. You're free to tune up your truck for better performance, but you aren't required to do so with this kit. It works just fine even when your truck isn't tuned. That's the true value of this high quality cold air intake kit. Add it to your truck and you'll have more power to work with, with or without a tuneup.

Full Air Filtering. Your truck will enjoy unfettered air access with this multi-layered filter. The filter is made from a few layers of aluminum mesh coated with epoxy for weather resistance. After the screens there are many different layers of top quality cotton that's been soaking in oil to keep particles at bay. It's this unique many-layered design of loose cotton material that allows air to flow so freely and quickly.

Plastic Mixed with Steel. This K&N Series 57 FIPK cold air intake mixes together polyethylene thick molded plastic with stainless steel and aluminum to create a top notch product. The intake relies on polyethylene for the heat shield as well as the intake tube. These two areas are highly durable and resist heat transfer to help keep the air cooler during standard operation. The cold air intake also relies heavily on stainless steel to hold parts in place using clamps. The aluminum of the filter is especially corrosion resistant and reliable to keep the air protected.

Simple Install. With just an hour of time you can install this intake kit. It bolts into position and does not require special knowledge or tools to get the job done. Simply fit it into position after removing the original equipment and then bolt it down. It's so simple.

Warranty for Life. K&N offers a One Million Mile Limited Warranty to customers, meaning that you should be covered for life without issue.

CARB Certified. CARB is a very strict emissions program that keeps ineficient vehicles off the road. This intake kit comes with Carb EO# D-269-48. allowing it to be legally used in each of the 50 states.

Application. This K&N 57 Series FIPK Cold Air Intake Kit is specifically designed to fit the 2011 to 2012 F-150s equipped with the 6.2L V8 engine and does not require re-tuning the vehicles computer for operation. Not compatible with the SVT Raptor.

Technical Note. The K&N Cold Air Intake is not designed for vehicles equipped with a Body Lift.

Shop All Truck Parts And Accessories

Shop All Cold Air Intakes For Trucks

Fitment:

• 2011 Ford F-150
• 2012 Ford F-150

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov