K&N Series 77 High Flow Performance Cold Air Intake (97-03 4.6L F-150)Find parts that fit my vehicle

Unrestricted Intake for Better Power. The K&N Series 77 High Flow Performance Cold Air Intake uses a massive conical air filter and an aerodynamically streamlined tube to draw many additional cubic feet of air into your 1997-2003 F-150’s 4.6L engine. Built to keep engine heat at arm’s length with a thoroughly sealed heat shield, this component cranks up the throttle response, fuel efficiency, and overall performance of your truck’s engine with a minimum of changes. Getting your pickup engine breathing more freely results in measurable power gains, too – up to +9.7 horsepower and +11.44 ft-lbs of torque.

Tune-Free Operation. The stock tune on your F-150’s engine computer or ECU (electronic control unit) is fully adequate to running the K&N Series 77 High Flow Performance Cold Air Intake. There is no need to flash the engine with an aftermarket tune after installing this component.

Tough Filter that Can Be Reused. Measuring a colossal 9” high, the filter element in the K&N Series 77 High Flow Performance Cold Air Intake is chrome topped and made from oiled cotton gauze. Twin aluminum, epoxy-coated screens are sandwiched into the layers for improved toughness. The filter is completely washable and reusable – the first cleaning is usually needed at 100,000 miles, and the element can be cleaned, re-oiled, and reused many times thereafter.

High Quality Construction in the USA. Made in America, the K&N Series 77 High Flow Performance Cold Air Intake features a powder-coated steel air box finished in textured black. The edges of this box are fully surrounded by EPDM foam sealing strips to ensure that the fit is snug and engine heat is excluded from the filter. The intake tube is made for maximum flow, with unrestricted mandrel bends. Making it immune to rust and most corrosion, the tube is fabricated from aluminum and given a high, attractive polish.

Accepts the Factory MAF. The K&N Series 77 High Flow Performance Cold Air Intake is made to have the stock MAF swapped over directly from the OE intake, and therefore has a MAF housing designed to fit that component. It also features attachments for the EVAP vent hose and crankcase vent hose.

Attaches with Simple Tools. Using regular hand tools, the K&N Series 77 High Flow Performance Cold Air Intake attaches to your F-150’s engine in under 90 minutes. This is a no-drill installation that needs no cutting or modifications, and uses the hardware included with the kit.

Million Mile Warranty. A standard 1 million mile warranty from the manufacturer covers the K&N Series 77 High Flow Performance Cold Air Intake.

CARB Executive Order for CA Legality. The K&N Series 77 High Flow Performance Cold Air Intake is CARB certified, meaning that it meets all the emissions standards set down in the famously stringent California regulations. This makes it legal for installation and street use throughout all 50 states of the USA. The associated CARB EO Number is #D-269-37.

Application. This K&N Series 77 High Flow Performance Cold Air Intake is specially designed to fit the 1997-2003 F-150s equipped with the 4.6L V8 engine.

Technical Note. The K&N Cold Air Intake is not designed for vehicles equipped with a Body Lift.

Shop All Truck Parts And Accessories

Shop All Cold Air Intakes For Trucks

Fitment:

• 1997 Ford F-150
• 1998 Ford F-150
• 1999 Ford F-150
• 2000 Ford F-150
• 2001 Ford F-150
• 2002 Ford F-150
• 2003 Ford F-150

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov