
FREE 1 to 3-Day Delivery on Orders $119+ Details
Add Details
Verify parts fit & get product recommendations
M-F 8:30A-11P, Sat-Sun 8:30A-9P
$1,799.10
Saved - View your saved items
We're sorry. We couldn't save this product at this time.
or use
Add Local Installation
Description, Reviews, Q&A
Brand | Hammerhead |
Bumper Type | Full Width |
Bumper Material | Steel |
Bumper Finish | Black |
Bumper Winch Mount | Winch Mount |
Bumper Fog Light Fitment | Aftermarket |
Bumper Location | Front |
Description. Hammerhead's front bumpers are designed to be winch capable and stand up to the punishment of on-road and off-road driving. This front bumper accommodates up to four 3.25" x 3.25" external dimension cube after-market off-road lights. They are made with 3/16" thick plate steel and are reinforced to allow for extra strength while keeping the bumpers as light as possible. The shackle mounts are a part of the mounting surface to the frame, extending through the bumper and are welded on the inside and outside of the bumper. This front bumper will accommodate the front factory sensors. *Hammerhead Armor prides itself on the fit and finish of every product that we offer. However, due to the vast variety and offerings of the after market community, we cannot guarantee that our products will work in conjunction with other brands' products. Always be sure to test fit our products to verify fitment with another manufacturer's product before the final installation.*
Fitment:
Hammerhead 600-56-0276
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Oct 16, 2024
Review shared from Hammerhead Winch Front Bumper with PreRunner Guard (15-19 Silverado 2500 HD)
Built like a tank
Purchased this bumper to replace the 1st one I damaged by being stupid. This thing is like a tank. Had the work done by the Stingray Chevrolet Body shop in Plant City Fl. that took care of the body damage that I also caused. This thing is beautiful and gets so many compliments from people it's almost embarrassing. If you need a bumper for a winch or not then get a Hammerhead, they are built to take it.
Oct 16, 2024
Review shared from Hammerhead Winch Front Bumper with PreRunner Guard (15-19 Silverado 2500 HD)
Built like a tank
Purchased this bumper to replace the 1st one I damaged by being stupid. This thing is like a tank. Had the work done by the Stingray Chevrolet Body shop in Plant City Fl. that took care of the body damage that I also caused. This thing is beautiful and gets so many compliments from people it's almost embarrassing. If you need a bumper for a winch or not then get a Hammerhead, they are built to take it.
Jan 11, 2023
Review shared from Hammerhead Rear Bumper with Flush Mount Reverse Light Cutouts (15-20 F-150, Excluding Raptor)
Great Bumper with a minor flaw
This is a great bumper. Heavy duty, nice finish, looks great on my truck. Well built with heavy duty shackle eyes and the mounting points and hardware designed to take the load. The one flaw I found is the steps in the ends of the bumper. The top of the step overhangs the bottom. When you put your foot into the step and step up, the top of your foot is stopped by the top of the step and if you aren't expecting it you will be forced to abort your step and fall back to the ground to avoid breaking your foot. On the installation time - if you have two people it should only take 1 or 2 hours. I did it myself and it took most of an afternoon. It is a heavy bumper.
Jan 8, 2023
Review shared from Hammerhead Rear Bumper with Flush Mount Reverse Light Cutouts (03-08 RAM 1500)
Awesome upgrade!
Very well built, great looking replacement for my rusted out original bumper. Hit some snags with original bolts not being long enough, but overall the hardest part was getting the old one off.
Feb 24, 2021
Review shared from Hammerhead X-Series Front Bumper (11-16 F-250 Super Duty)
Hammerhead XSeries Awesome Front Bumper
Hammerhead X Series looks great and provides protection over the entire frontend. Covers more area than other bumpers I have tried. Needed to protect against Wildlife and Highway debris after replacing two bumpers that were less in cost but more in down time and replacement time. Hammerhead went BIG!
Nov 17, 2020
Review shared from Hammerhead Low Profile Formed Guard Front Bumper (19-21 Silverado 1500)
Awesome product
Fits very well for an aftermarket product. Very impressed. Looks great on the truck as well
Jun 23, 2020
Review shared from Hammerhead Bull Bar with LED Light Openings; Black (13-18 RAM 1500, Excluding Rebel & Sport)
Unique, Agressive Look
I love the look of this bull bar. I wanted something that would be different, stand out, and provide an agressive look and this certainly fit the bill. Had a little bit of trouble getting the passenger side support bracket to sit flat and all 8 screws that attach the bar to the mounts to line up, but if you wait to tighten the support brackets you should have the wiggle room you need to get everything to sit the way it needs to. Wish it came with the covers (separate add-on from Hammerhead) to "plug" the light holes. For these reasons I have to give it 4 stars.
May 1, 2020
Review shared from Hammerhead X-Series Front Bumper (03-06 Silverado 1500)
$$$$$$
Good bumper. Not worth the price. Very tough. Has a rugged look.
May 1, 2020
Review shared from Hammerhead Rear Bumper with Flush Mount Reverse Light Cutouts (99-06 Silverado 1500 Fleetside)
Good bumper
Great bumper. Has great off road look. Very durable. Great for off roading.
Apr 19, 2020
Review shared from Hammerhead Bull Bar with 21.50-Inch LED Light Bar; Black (14-18 Silverado 1500)
Great bull bar
Very easy install, nice aggressive looking bull bar, worth the money
Apr 15, 2020
Review shared from Hammerhead Rear Bumper with Round Reverse Light Cutouts (09-18 RAM 1500 w/ Factory Dual Exhaust)
Can't go wrong Hammerhead Armour
Let me tell you I know people with iron cross bumpers, that want this one. bumper is so we'll built. All the welds, are perfect not a single defect. Looks great on the truck!