BD Power 2 Low UnLoc (13-24 4WD RAM 3500)Find parts that fit my vehicle

Description.

Vehicle maneuverability is reduced while in 4WD. When the 2Low Unloc is turned on, you disable the front wheel drive mechanism allowing for full torque to be available to the rear wheels only. The front wheels will NOT be driven, delivering normal 2WD maneuverability while in low range! This will also allow for sharp "All The Way Over" turns without the front axle u-joint hopping or binding.

FEATURES

Installation is simple, the kit plugs in below the glove box

No wire cutting or splicing and no wires through the firewall

Kit comes with an illuminated rocker switch for control and to indicate when the front axle is being overridden

Designed to allow the operator to manually disable the front wheel drive mechanism by holding the hubs in the free (2WD) mode with the transfer case in 4WD low range

By allowing the front wheels to be disengaged, maximum torque is available to the rear wheels

This will also allow for sharp "All The Way Over" turns without the front axle u-joint hopping or binding

With this kit installed, the front wheels will NOT be driven through the transfer case

Allows to have full power and torque while in a high gear reduction applied to the rear axle(s) only

INSTALL TIME

1 Hour 30 Minutes

WARRANTY

Parts

12-Months

12,000 Miles

EMISSIONS

This product does not require an EO in California. By nature of its design, it is legal for sale and use in all 50 states. Replacement parts included. (EMS:4)

Fitment:

• 2013 Dodge Ram 3500
• 2014 Dodge Ram 3500
• 2015 Dodge Ram 3500
• 2016 Dodge Ram 3500
• 2017 Dodge Ram 3500
• 2018 Dodge Ram 3500
• 2019 Dodge Ram 3500
• 2020 Dodge Ram 3500
• 2021 Dodge Ram 3500
• 2022 Dodge Ram 3500
• 2023 Dodge Ram 3500
• 2024 Dodge Ram 3500

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov